What's included:
- 1x outer box (the top comes taped, no need to cut this top tape!)
- 1x base assembly
- 1x top pulp
- 4x clips
What’s not:
- 1x trash bag
Before you pack the bin up, please prepare the interior and exterior of your Mill for shipping.
- Unpair your bin: open the Mill app and navigate to Menu
→ Device and tap “Remove your bin.”
- Empty all contents of the bucket.
3. Place the bucket into a plastic trash bag and place it back into the bin.
4. Tape the lid closed and the rear door in place to hold the green canister inside during shipping.
5. Hank and secure the power cord together.
Instructions
- Make sure the bottom paper pulp tray is placed in the cardboard base tray. Take note of where the base tray says “pedal”.
- Lift the bin being sure that the pedal is over the side that says “pedal” and place it into the base tray assembly.
- Take the top pulp piece and place it over the top of the bin.
- Lift the outer box over the top of the entire assembly, pushing down until the outer box reaches the floor.
- Secure the box together with the 4 black clips.
- Tape the bottom of the box as needed.
7. Place the FedEx return label OVER the original shipping label on the box.
8. Self-schedule a FedEx pickup or reach out to Mill Support if you need pickup assistance. On the pickup day, you can leave the box outside or in your designated package area for FedEx.