How to swap out your Mill after receiving a full bin replacement with accessories (Mill Plus) - Matte Black and Stainless Steel

What’s included:

• 1x return labels
• 1x new bin in box
  • Save the box to return your old bin
  • 1x bucket
  • 1x carbon filter
  • 1x power cord
• 1x box

What’s not:

• 1x trash bag
• Packing tape

Instructions

1. Unpair your old bin: open the Mill app and navigate to Menu→ Device and tap “Remove your bin.” Unplug from the wall then the back of the bin.

2. Unbox your new bin by opening the top of the box and removing contents.
   • 
3. The box is two pieces clipped together with 4x clips. Please separate the outer box from the base by unlatching and removing the 4 clips (set them aside for later), then pull the top box off of the base to reveal the bin.
   • 
4. Remove the bag, non-abrasive sheet, bucket isolators, and foam sheet and set them aside for later. 
5. Move your new bin back to your preferred spot. Make sure your bin is on a hard, even floor so it’s ready for the daily grind.
6. Open the Mill app and tap “Set up your bin.” Skip the “Unboxing” chapter and go straight to the “Set up your bin” chapter.
   • 
7. Prepare your old bin for return. 
8. Follow this guided flow on your phone: mill.com/return-instructions. If you're having trouble with the returns website on your phone, follow the steps here.