How to swap out your Mill after receiving a full bin replacement with accessories (Mill Plus) - White

What’s included:

• 1x return labels
• 1x new bin in box
  • Save the box to return your old bin
    • Discard the sled piece - it is not needed for repacking
  • 1x power cord
  • 1x bucket
  • 1x carbon filter
  • 1x box 
    • 2x bottom/side pulp pieces
    • 1x top pulp piece
    • 1x bag
    • 2x blue spacer

What’s not:

• 1x trash bag

• Packing tape 

   

Instructions

1. Unpair your old bin: open the Mill app and navigate to Menu→ Device and tap “Remove your bin.” Unplug from the wall then the back of the bin.
   • 
2. Unbox your new bin. 
3. Move your new bin back to your preferred spot. Make sure your bin is on a hard, even floor so it’s ready for the daily grind.
   • 
4. Open the Mill app and tap “Set up your bin.” Skip the “Unboxing” chapter and go straight to the “Set up your bin” chapter.
   • 
5. Transfer any Food Grounds or scraps from your old bin to your new bin's bucket. 
6. Prepare your old bin for its journey back to Mill.
7. Follow this guided flow on your phone: mill.com/return-instructions. If you're having trouble with the returns website on your phone, follow the steps here.